a a a a a a a a a a a
 
Optical Flat, Polish flat, Checklite, Straight Edge & Filler Gauges, Abrasive Feeding System, Polish flat, Oil Reclaim System
 
a  
Measuring Instruments
View intro
Intro
a member of OBARA group
 
  speedfam  
  speedfam  
  speedfam  
 Optical Flat
speedfam
 
 
 
Optical Flat,  Checklite, Straight Edge & Filler Gauges, Polish flat
 
 
Speedfam optical flats provide the fast, sure and accurate method of obtaining flatness measurement under Monochromatic Checklite. It is always necessary to have reflective, clean and dry surface of finished component before measuring its flatness. Flatness measurements are accomplished by reading interference (light) bands which appear on the surface of the work piece when placed under a Speedfam optical flat. Fringes appear when the flat is placed gently on work piece surface under Monochromatic Checklite. The optical flats are available in various diameters.
 
Light bands or lines & their interpretation is illustrated as below.
 
LIGHT BAND MEASUREMENT OF FLAT SURFACES
speedfam speedfam speedfam speedfam
Straight,parallel lines or bands indicate true flatness The flatness is read from the no. of bands intersected by a tangent line to any curve, counted from the point of greatest curvature to one side of piece. Above work piece is 1band out-of-flat. Illustration shows low area or grove in work piece of 1/2 band deep and a drop-off area at lower right hand edge of 1band. Shown here is edge rounding or "Dubbing" of 1/2 band.
speedfam speedfam
If broadening of light bands occurs when pressed at the center, the piece is concave Either concave or convex pieces may show as a "Bulls-Eye" design. If Bulls-Eye" moves toward point of pressure when pressed on edge the piece is convex.
Optical flats are available in Borosilicate glass material with flatness accuracies as ?4, ?6, ?10. These are available either Single side or Double side surfaces. Sizes available are 1", 2", 3", 4", 5", 6", as standards and other sizes on request.
 
Applications:
To measure flatness on polished components w.r.t. checklite.
   
   
  speedfam
 
speeedfam
 
speedfam
speedfam Double Side Machines
speedfam Free Abrasive Machines
speedfam Flat Honing Machines / Fine Grinding Machines / Precision Machines
 
speedfam Table Top Sweeper Arm Machines
speedfam Single Side Machines
speedfam Table Top Machines
 
speedfam
 
speeedfam
 
speedfam
speedfam Boron Carbide
speedfam Silicon Carbide
speedfam Aluminum Oxide
speedfam Diamond Powder
speedfam Cerium Oxide
speedfam Cerium Pads
speedfam Lapping Oil
speedfam Valve Grinding Paste
speedfam Lapping Paste
speedfam Hand Lap Plates
speedfam Moistening Spray
speedfam Diamond Paste
speedfam Die Polishing Paste
speedfam Conditioning Rings
speedfam Polishing Pads
speedfam Polishing Compounds
speedfam Work Holding Carriers
 
speedfam
 
speeedfam
 
speedfam
speedfam Checklite
speedfam Optical flat
speedfam Straight Edge & Filler Gauges
speedfam Span Guage
 
speedfam
 
speeedfam
 
speedfam
speedfam Abrasive Feeding System
speedfam Polish Flat
speedfam Oil Reclaim System
 
speedfam
 
speeedfam
 
speedfam
speedfam Concave Lapping Machine
 
speedfam
 
speeedfam
 
speedfam
speedfam Optical & Ophthalmic
speedfam Melchiorre S.r.l., Italy
speedfam Thru Feed Grinding
 
speedfam
 
speedfam
 
speedfam
     
 Branch Offices:   Registered office & Works:
speedfam Chennai speedfam Delhi speedfam Kolkata
  W- 401, TTC Industrial Area, MIDC,Rabale, Navi Mumbai - 400 701, (India)
Phone: +91-22-2769 2621 / 2769 0945 Fax: +91-22-2769 2869  Email :
 
 
@2010 Speedfam (I) Pvt. Ltd., Mumbai
Site Developed By Renercon